Skip to content
  • There are no suggestions because the search field is empty.

Charging and turning your LifeGuard SafetyWatch on or off

This guide explains how to charge and power your SafetyWatch.

Charging the SafetyWatch

  1. Place the watch on the charging dock.

  2. Plug the USB-C cable into the dock and connect the other end to a power source.

  3. The watch will begin charging automatically.

Important:

  • Fully charge the watch for 2–3 hours before first use.

  • Typical runtime is up to 48 hours, depending on usage and environmental factors such as reception.

Turning the SafetyWatch on

  • Press and hold the side button for 2 seconds.

Turning the SafetyWatch off

  1. Swipe right → tap Settings

  2. Swipe up → tap System

  3. Tap Power Off → tap the green tick to confirm

Getting an initial GPS location

After turning the watch on, stand near a window or outdoors so it can lock onto GPS satellites.